Airgle AG300

Code: AG300
  • £750.00

The Airgle AG300 contains an H14 cHEPA filter, which removes 99.999% of harmful pollutants down to 0.003 microns - that's particles 100 times smaller than those captured in a standard H13 Hepa filter. The AG300 is an approved medical device and features a 100% sealed filter design which is 10 times more effective than comparable HEPA air purifiers.

 

Item in Stock   |   Usually dispatched within 24 hours
Loading...

Unrivalled Filtration Technology

Airgle air purifiers feature enhanced filtration technology that employs patented photocatalytic oxidation, premium activated carbon and cHEPA to achieve breakthrough results in the reduction of pathogens, harmful gases and airborne pollutants.

CHEPA / Carbon Filter:
Captures gaseous pollutants and removes up to 99 999% of airborne particles Features 227gs of premium activated carbon that captures chemicals, tobacco smoke, odours. Features 1.1m of premium CHEPA filter that removes dust, pollen, pet dander, tobacco smoke and other indoor airborne pollutants.

Titanium Pro
Removes chemicals, bacteria and viruses
The world's first and only photocatalytic oxidation technology that uses a catalytic plate, electronic component, a germicidal UV lamp and UV lamp ballast within one disposable module

Maximum Air Flow and Fast Purification
Many airborne pathogens have very slow precipitation rates, so they can remain in the air for many hours. The less time a pathogen remains in the air, the lower the chance of cross-infection. As a
result, Airgle recommends a minimum of 5 air exchanges per hour.

Airgle cHEPA/Carbon Filters
Maintaining the 100% seal that ensures all the air passing through the Airgle Room Air Purifier passes through the filters, rather than leaking through without filtration.

Gaseous Pollutants
Removes gaseous pollutants such as tobacco smoke, odor and other volatile organic compounds. It also decomposes formaldehyde gaseous pollutants that occur from new renovations.

Particle Filtration Technology
It has a particle removal efficiency up to 99.999% for particles with a diameter less than 0.003 µm.

Titanium Pro UV Module
Titanium Pro UV’s surface is coated with titanium dioxide carrier, which can remove up to 99.9999% of bacteria from the air. Contaminants are instantly converted to harmless substances when irradiated with UV light. This module is patented in the United States.

Titanium Pro UV PCO Technology
This patented technology is a next-generation PCO system that removes VOCs, neutralize odours and kills bacteria and viruses. As pioneers in the promotion of cleaner and safer air, Airgle has developed the world’s first and only photocatalytic oxidation technology that uses a catalytic plate, electronic component, a germicidal UV lamp and a UV lamp ballast within one solo disposable module.

3 Watt UVC Lamp
Plug and play technology
Very efficient at room temperature
No chemical additives
No residual ozone
High oxidation yields for gas phase reactants and odours
Low energy requirements
Works in humid conditions
Long service life
Low maintenance requirement

How Titanium Pro UV PCO Technology works
Titanium dioxide under the effect of UV lamp Forms a strong oxidizing hydroxyl radical (OH)
Destroys virus cell structures
Destroys harmful volatile gases and odours
Eliminates cells, sources of pollution and allergens
Results in harmless water molecules and carbon dioxide

 

  •     cHEPA ultra fine filtration technology is MERV19 grade filter
  •     Filter 99.999% ultra-fine pollutants down to 0.003 microns in size
  •     PhotoCatalytic Oxidation TiO2 Technology (Titanium Pro)
  •     100% pressure sealed technology ensures removal of viruses and bacteria in a single pass
  •     Ultra quiet design
  •     Air quality monitor
  •     Filter life monitor
  •     Infrared remote control
  •     Timer and night mode
  •     ARB ozone free safety certification
  •     US energy star qualified
  •     ETL listed mark
  •     Apps for iOS and Android

 

 

Room Size: 16-40m² (AHAM)*
 
CADR: M³/hr:200m³/hr **
Filter Efficiency (Microns) 99.999% @ 0.003 Grade MERV19 - Class1 Medical Device.
Size (HxWxD): 33.5 x 24.6 x 29.7cm
Weight: 5.6kg
Energy consumption (watts):1.2 to 45w
Noise level dB(A): 32-65
Fan Speeds: 5
Air outlet: Front
Air inlet: Rear
Warranty (Years): 2 
 
Features
Ozone Free: Yes
Automatic Operation: Yes
Wi-Fi: Yes
Timer: Yes
Carbon (Type): Granule + Titanium Pro ***
Filter Change Indicator: Yes
 
 
*AHAM
AHAM certified room size is the size of room in which the air purifier can provide a full five air changes per hour. Therefore refreshing all of the air in the room through its filters once every twelve minutes.This is more relevant than 'maximum' room size which does not reflect an air purifiers genuine effective capability. Always be sure to only use the 'AHAM certified' room size for true comparison purposes.
 
**CADR
CADR stands for Clean Air Delivery Rate and is an actual measurement of the amount of filtered air provided by the machine.This is the only true way to compare like for like between air purifiers when assessing how powerful they are (unless comparing with a certified medical device, see below for an explanation of this). CADR is not the same as air volume which will always appear higher due to the fact that it is only a measurement of the units fan power without a filter Installed. 
 
***Carbon Filters
Carbon filters remove chemical fumes including VOC's, traffic combustion gases, pet odours, tobacco smoke and many more gaseous pollutants.However not all carbon filters are the same. Basic carbon 'sheet' filters are generally lightweight and have little capacity to adsorb these pollutants effectively. On the other hand filters containing actual carbon 'granules' are infinitely more effective and should always be chosen over carbon sheets where the most effective gaseous pollutant removal is required. Some professional air cleaning devices also contain patented Titanium Pro modules which in tandem with granular carbon can remove even higher levels of VOC and odours whilst also killing bacteria and viruses.
 
Class 1 Medical Device
Some air purifiers have official Medical Device Certification. These will contain an H13 grade hepa as a minimum, and most importantly have a certified leak free seal around the filter housing. A leak free seal ensures 100% of polluted air goes directly through the filter with no unfiltered bypass. Because of this, virtually all airborne contaminants are removed in a single pass through the machine whereby standard air purifiers need multiple passes to remove the same amount. Typically a Medical Grade Device will have a lower CADR figure than a standard air purifier because of this airtight seal, however because it is filtering out the contaminants in a single pass it does not rely on a high CADR for peak performance.
 
Due to continuous development and improvement, the manufacturer reserves the right to change the specification of the product or its performance,or the contents of the guide, without notice.
 

Free delivery on orders over £50.00

Same day dispatch on orders placed before 4pm. Your item is delivered via DPD 24 or 48 hrs after dispatch depending upon which service you choose. If you order over the weekend your item will be dispatched the following working day.
An exact delivery time  will be emailed and texted to you on your delivery date. We'll give you a one hour delivery window, meaning you don't have to wait around for us!
Returns are always treated with the greatest of respect. Please have a quick read of our returns policy or tell David at info@breathingspace.co.uk why you'd like to return the item.


 


Credit and Debit Card
payments can be taken at our secure checkout using Sagepay. 
PayPal can also be taken at our secure checkout. This means we do not hold or have access to your card details. Your Privacy is ensured by the fact that we're registered under the Data Protection Act. You can read our full privacy policy if you'd like to. our privacy policy 

Top